资源列表

« 1 23 4 5 6 7 8 9 10 ... 598 »

[钢铁冶金洛氏硬度检测经验

说明: 暂无简介
<zag***> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金脉冲电流对晶粒细化的影响中碳低合金钢

说明: 暂无简介
<zxd****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金压力单位换算表

说明: 暂无简介
<twin*****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金亚稳相的形成

说明: 在一定的外界条件(压力、温度下)处于热力学非平衡状态的物相。在一定的外界条件(压力、温度下)处于热力学非平衡状态的物相。这种物相由于制备工艺、缺陷等条件暂...
<HRW1*****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金钙治疗和应变率对再热裂纹的影响钒(修改2)

说明: Vanadium-modified (V-Mod) 2.25Cr-1Mo steel has been studied to determine the effect ofcalcium treatments and strain rate on susceptibility to reheat cracking of the heat-affectedzone in low-alloy steels for reactor applications. The susceptibility t
<张祥540******> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金断裂韧性分析转变温度

说明: Center for Advanced Aerospace Materials, Pohang University of Science and Technology, Pohang 790-784, Republic of Koreab Plate Research Group, Technical Research Laboratories, POSCO, Pohang 790-785, Republic of KoreaReceived 11 February 2005; receiv
<wy40****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金地表起伏的影响αTi-Mo合金沉淀

说明: The characteristics of the formation of surface relief associated with h.c.p. α precipitates in a Ti–Mo alloy werestudied by atomic force microscopy coupled with electron back scattering diffraction and three-dimensional morphologicalobservation. Te
<okcc****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金产品焊接试板管理制度

说明: 产品焊接试板的质量控制由焊接责任工程师负责,焊接检验员对焊接试板制作、加工和试验的全过程,进行跟踪检验和确认,探伤室、理化试验员负责具体的检验任务,生产车间负责试板的制作和试样的加工。
<qqz***> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金贝氏体的表面凹凸定义的各个方面

说明: Criticisms of reports that ferrite laths have a sessile interfacial structure are refuted. A local lattice correspondence,achieved across coherent regions between interfacial defects, suffices to produce surface reliefs and martensitic crystallograp
<ha***> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金Nb的应变诱导铁素体转变的影响

说明: Effects of the Nb addition on the strain induced ferrite transformation just above Ar3temperature were investigated. Hotcompression tests were performed with varying the true strain up to 1.6 (80% reduction) using Gleeble 1500. After the hotdeformat
<jinm*****> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金71型显微硬度计测定铬微裂纹

说明: 为 了满 足 汽车产品中性盐雾试验要求,我厂钢铁件产品采用半光亮镍/光亮镍/高硫镍/微裂纹铬工艺。为了控制产品质量,保证微裂纹铬条数在工艺范围内,检测微裂纹铬条数是一个必不可少的环节。
<tianla*******> 在 2019-03-06 上传 | 大小: | 下载0次

[钢铁冶金16MnR与15MnNbR材料对比

说明: 16MnR与15MnNbR材料对比
<yudi****> 在 2019-03-06 上传 | 大小: | 下载0次
« 1 23 4 5 6 7 8 9 10 ... 598 »

建筑资料网 www.5imomo.com